Durango 2WD V8-4.7L (2008)
Air Filter Element: Service and Repair
Installation
INSTALLATION
1. Clean any dirt or foreign matter from the inside of the air cleaner housing (2).
2. Install the air cleaner element (1) into air cleaner housing. Make sure the element is properly seated in the housing.
3. Position the air cleaner housing cover (4) to the air cleaner housing (6) and engage the cover locating tabs (5). Make sure the tabs are fully
engaged.
4. Fully install the air cleaner housing cover to the air cleaner housing and engage the three retaining clamps (3). Make sure the clamps are fully
engaged.
5. Engage air inlet hose (1) to the grommet located on the top of the radiator fan shroud (2).