Durango 2WD V8-4.7L (2008)
3. Install the two screws (1) that secure the driver side demister duct (2) to the back of the instrument panel. Tighten the screws to 2 Nm (17 in. lbs.).
4. Reposition the instrument panel wire harness (3) to the instrument panel and install the two screws (4). Tighten the screws to 2 Nm (17 in. lbs.).
5. Install the defroster duct See: Front Defroster Ducts - Installation.
6. Install the instrument panel top cover.
7. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
PASSENGER SIDE INNER
8. Position the passenger side inner demister duct (1) to the back of the instrument panel and connect it to the passenger side outer demister duct (3).
Tilt and rotate the duct as necessary.
9. Install the two screws (2) that secure the passenger side inner demister duct to the instrument panel. Tighten the screws to 2 Nm (17 in. lbs.).
10. Install the defroster duct See: Front Defroster Ducts - Installation.
11. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
PASSENGER SIDE OUTER
