Durango 2WD V8-4.7L (2008)
Trailer Lamps: Service and Repair
Installation
INSTALLATION
1. Insert the trailer tow connector (3) into the bracket (2) on the trailer hitch receiver with the 7-pin connector oriented toward the outboard side of
the bracket.
2. Using hand pressure, press the connector firmly and evenly into the bracket until both spring clips (1) on the connector housing snap into place on
the back side of the bracket.
3. Reach behind the bracket (1) to access and reconnect the connector (3) of the body wire harness from to the connector receptacle on the back of
the trailer tow connector housing (2).
4. Reconnect the battery negative cable.
