Durango 2WD V8-4.7L (2008)
Fuse Block: Application and ID
Fuse Panels
FUSE PANELS
CAUTION: When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating
other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it suggests a problem in
the circuit that must be corrected.
NOTE: If you are leaving your vehicle dormant for longer than 21 days you may want to take steps to protect your battery. You may do this by
disconnecting the battery or by disconnecting the two ignition-off draw (I.O.D.) fuses located in the auxiliary Power Distribution Center (PDC)
in the engine compartment. The I.O.D. cavities include a snap-in retainer that allows the fuse to be disconnected without removing it from the
fuse block. Pressing the I.O.D. fuse back into the cavity reconnects it.
Interior Fuses
The fuse block contains blade-type mini-fuses, relays, and circuit breakers for high-current circuits. It is located in the left kick panel. It is accessible
through a snap-in cover.
