Durango 2WD V8-4.7L (2008)
1. Depending on which coil is being removed, the throttle body air intake tube or intake box may need to be removed to gain access to coil.
2. Disconnect electrical connector (2) from coil by pushing downward on release lock on top of connector and pull connector from coil.
3. Disconnect secondary cable (3) at coil.
4. Clean area at base of coil with compressed air before removal.
5. Remove coil mounting bolt (3).
6. Carefully pull up coil assembly (2) from cylinder head opening with a slight twisting action. This will help to disengage rubber boot (4) from spark
plug (5).
7. Remove coil from engine.
