Durango 2WD V8-4.7L (2008)
1. Move the third row seat cushion to its storage position, but leave the third row seat back in its upright position for easiest access to the seat belt
lower anchor (2) on the quarter inner panel (3).
2. Remove the screw (1) that secures the lower anchor to the tapping plate on the quarter inner panel.
3. Remove the D-pillar trim panel (1) from the inside of the upper D-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Pillar Trim/D-Pillar Trim/Removal.
4. Route the seat belt (2) and lower anchor through the access hole in the D-pillar trim panel.
5. Remove the screw (4) that secures the seat belt turning loop (3) to the inside of the upper D-pillar.
6. Remove the turning loop from the D-pillar.
7. Remove the quarter trim panel from the lower D-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter
Panel Trim/Quarter Trim Panel - Removal.
8. Remove the screw (6) that secures the retractor bracket (5) to the lower D-pillar.
9. Remove the third row seat belt and retractor from the D-pillar as a unit.
