Durango 2WD V8-4.7L (2008)
Ignition Switch Lock Cylinder: Service and Repair
Key/Lock Cylinder - Installation
INSTALLATION
The ignition key (2) must be in the key cylinder (1) for cylinder installation.
1. Install the key cylinder (1) into the housing (3) using care to align the end of the key cylinder with the ignition switch.
2. Push the key cylinder (1) in until it clicks.
3. Replace the lower shroud.
4. Install the tilt lever handle.
5. Install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
6. Reconnect the battery.
