Durango 2WD V8-4.7L (2008)
Heated Glass Element Relay: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the trim cover from the cowl (2) on the driver side of the vehicle See: Body and Frame/Interior Moulding / Trim/Trim Panel/Description
and Operation/Cowl Trim.
3. Locate the junction block (JB) (1).
NOTE: Refer to the fuse and relay map on the inside of the JB cover for EBL relay location.
4. Remove the EBL relay from the JB.
