Durango 2WD V8-4.7L Flex Fuel (2009)
Rear Door Hinge: Service and Repair
Rear Door Hinge - Removal
REMOVAL
NOTE: It is not necessary to remove the door to replace the hinges if they are replaced one at a time.
NOTE: The welded washers should not be separated from the hinge. If the washers are removed the door may have to be re-adjusted.
NOTE: A suitable body sealant should be used when removing or moving the hinges.
UPPER HINGE
1. Using a grease pencil or equivalent, mark the position of the hinge on the door and B-pillar.
2. Remove the nuts (2) attaching the hinge to the door (3).
3. Remove the three bolts (6) attaching the hinge (1) to the B-pillar (2) and remove the hinge.
LOWER HINGE