Durango 2WD V8-4.7L Flex Fuel (2009)
Trunk / Liftgate Latch: Removal and Replacement
Power Liftgate Latch - Removal
REMOVAL
1. Remove liftgate trim panels. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel - Removal
2. Remove the grooved end of the latch actuator rod (1) from the metal clip on the exterior handle (4).
3. Disconnect the bent end of the latch actuator rod (2) from the swing clip on the latch (3).
4. Disconnect the electrical connector (1).
5. Remove the screws (3) and remove the latch (2).
Power Liftgate Latch - Installation
INSTALLATION