Durango 2WD V8-4.7L Flex Fuel (2009)
Brake Pedal Assy: Service and Repair
Brake and/or Accelerator Pedals - Installation
WITHOUT 5.7L HEV
NOTE: The adjustable brake pedal can be serviced separately from the accelerator pedal and the bracket.
NOTE: When replacing the components both pedal assemblies must be in the fully down position toward the floor for proper adjustment,
Pedals can be moved manually by rotating the cable on the component not being replaced. New components come in the correct
position until activated.
1. Install the pedal assembly (2) to the vehicle.
2. Install the mounting bolts (1) and tighten to 8 Nm (75 in. lbs.).
3. Push the booster back into the cowl.
4. Install the two bolts to the electrical bulkhead to the pedal bracket.
5. Reconnect the adjustable pedal assembly electrical connectors. Adjustable pedals only.
6. Install the booster mounting nuts (1) Tighten to 31 Nm (275 in. lbs.).
