Durango 2WD V8-4.7L Flex Fuel (2009)
6. Remove old seals (1) from the cylinder body (2).
Brake Master Cylinder Reservoir - Installation
INSTALLATION
CAUTION: Do not use any type of tool to install the seals. Tools may cut, or tear the seals creating a leak problem after installation. Install the
seals using finger pressure only.
1. Lubricate the new seals (1) with clean brake fluid and Install new seals in cylinder body (2). Use finger pressure to install and seat seals.
2. Start the reservoir (1) in the seals (2). Then rock the reservoir (1) back and forth while pressing downward to seat it into the seals (2).
