Durango 2WD V8-4.7L Flex Fuel (2009)
INSTALLATION
1. Install intake manifold gaskets.
2. Position intake manifold.
3. Install the ignition coils (1,2) and manifold retaining bolts and torque from the center bolts, moving front to back in a crisscross pattern to 12Nm
(106 in. lbs.).
4. Install throttle body assembly (3), if removed.
5. Install fuel rail See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Rail/Service and Repair/Fuel Rail - Installation.
6. Connect electrical connectors for the following components:
-
Manifold Absolute Pressure (MAP) Sensor
-
Electronic Throttle Control (ETC) (2)
-
Coolant Temperature (CTS) Sensor
-
Ignition coil
-
Fuel injectors
