Durango 2WD V8-4.7L Flex Fuel (2009)
5. Remove the two bolts (1) that secure the rear evaporator extension lines (3) and the rear A/C expansion valve (2) to the rear evaporator tapping
block (4).
6. Disconnect the rear evaporator extension lines from the rear A/C expansion valve (2) and remove the lines from the rear heater-A/C housing.
7. Disconnect the rear A/C expansion valve from the rear evaporator tapping block.
8. Remove and discard the O-ring seals and install plugs in, or tape over the opened extension line fittings and expansion valve and evaporator ports.
