Durango 2WD V8-4.7L Flex Fuel (2009)
The A/C compressor is filled with refrigerant oil from the factory. Use the following procedure to drain and measure refrigerant oil from the A/C
compressor.
1. Drain all of the refrigerant oil from the original A/C compressor in the vehicle into a clean measured container.
2. Drain all of the refrigerant oil from the new A/C compressor into a clean measured container.
CAUTION: Use only clean refrigerant oil of the type recommended for the A/C compressor in the vehicle.
3. Refill the new A/C compressor with the same amount and type of refrigerant oil that was drained out of the original compressor.
4. Install the new A/C compressor onto the engine See: Compressor HVAC/Service and Repair/A/C Compressor - Installation.
