Durango 2WD V8-4.7L Flex Fuel (2009)
Brake Lamp Relay: Description and Operation
Stop Lamp Inhibit Relay - Description
DESCRIPTION
Vehicles equipped with an optional Electronic Stability Program (ESP)/Traction Control System (TCS) package have a stop lamp inhibit relay. The relay
is contained within a small, rectangular, molded plastic housing and is connected to all of the required inputs and outputs through four integral male
spade-type terminals that extend from the relay base plate.
The stop lamp inhibit relay is located in the Junction Block (JB) in the passenger compartment on the driver side cowl side inner panel below the end of
the instrument panel.
The stop lamp inhibit relay cannot be adjusted or repaired and, if ineffective or damaged, the unit must be replaced.
