Durango 2WD V8-4.7L Flex Fuel (2009)
License Plate Bulb: Service and Repair
License Plate Lamp Bulb - Removal
BULB
1. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician
trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
2. Remove the license plate lamp (3) from the mounting hole in the underside of the exterior liftgate handle (2). See: Service and Repair/License
Plate Lamp - Removal.
3. Pull the base of the bulb straight out of the socket (1).