Durango 2WD V8-4.7L Flex Fuel (2009)
5. Remove the bolt (1) that secures the front section of the A/C liquid line (2) to the receiver/drier (3).
6. Disconnect the front section of the A/C liquid line from the receiver/drier and remove and discard the O-ring seal.
7. Install plugs in, or tape over, the opened liquid line fitting and receiver/drier port.
8. Remove the nut (1) that secures the front section of the A/C liquid line (2) to the A/C condenser (3).
9. Disconnect the A/C liquid line from the A/C condenser and remove and discard the O-ring seal and gasket.
10. Install plugs in, or tape over, the opened liquid line fitting and condenser port.
11. Remove the front section of the A/C liquid line from the engine compartment.
REAR SECTION