Durango 2WD V8-4.7L Flex Fuel (2009)
3. Remove the buckles and anchor bracket from the seat cushion frame as a unit.
BLIND RIVETS ABSENT
1. If the blind rivets are absent, remove the two pivot screws that secure the front of the left seat cushion frame to the brackets on the rear floor panel
(5).
2. Fold the left seat cushion up against the left seat back (3) for access to the two buckle anchor brackets (4 or 6).
3. Remove the plastic plug (2) from the buckle anchor bracket to be removed.
4. Remove the screw (1) that secures the buckle anchor bracket to the rear floor panel.
5. Remove the buckles and anchor bracket from the seat cushion frame as a unit.
