Durango 2WD V8-4.7L Flex Fuel (2009)
1. Unsnap the upper edge of the trim cover (3) from the second row outboard seat belt turning loop (1) and disengage the tab (2) on the lower edge of
the cover to access the turning loop screw.
2. Remove the screw (3) that secures the seat belt turning loop (4) to the height adjuster (1) on the upper C-pillar (5).
3. Remove the seat belt turning loop from the height adjuster.
4. Remove the upper trim (2) from the inside of the C-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar
Trim/C-Pillar Trim Panel-Removal.
5. Remove the screw (4) that secures the lower seat belt anchor (3) to the rear floor panel.
6. Remove the quarter trim panel (2) from the lower C-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Luggage Compartment Trim/Quarter Trim Panel - Removal.