Durango 2WD V8-4.7L Flex Fuel (2009)
10. Clean and dry area of glass to be glued with a suitable glass preparation solvent and rag.
11. Apply primer to gluing surface at windshield seal.
12. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (2).
13. Allow primer to air dry for at least 10 minutes.
14. Using a flash light, verify that glass primer is without damage.
Windshield Opening Preparation
1. Clean and vacuum windshield opening.
2. Level old bead of windshield opening adhesive (1) to a thickness of approximately 1 mm (0.04 in.) and remove loose adhesive.
