Durango 2WD V8-4.7L VIN N (2001)
Driver/Vehicle Information Display: Description and Operation
OVERHEAD CONSOLE
An overhead console unit is an available factory-installed option on this model The overhead console unit features a garage door opener storage
bin, a sunglasses storage bin, two reading and courtesy lamps and either a standard paperclip or an optional compass mini-trip computer. See the
owner's manual in the vehicle glove box for more information on the features, use and operation of all of the overhead console components and
systems.
The overhead console for this model includes two front-mounted reading and courtesy lamps, a sunglasses storage bin, universal transmitter and
either a standard paperclip or an optional compass mini-trip computer.
The overhead console is secured with two snap clips at the rear and a single screw at the front to the overhead console mounting bracket. The front
of the overhead console mounting bracket is secured to the roof header near the windshield with two screws, and the rear of the bracket is secured
with double-faced tape to the inside surface of the roof panel. A single electrical connection joins the overhead console wire harness to the roof
wire harness.
Following are general descriptions of the major components used in the overhead console. See the owner's manual in the vehicle glove box for
more information on the use and operation of the various overhead console features.
Sunglass Storage Bin
A sunglasses storage bin is included in the overhead console. The storage bin is located near the center of the overhead console and is held in the
closed position by a spring-loaded latch mechanism that is integral to the storage bin door. The interior of the bin is lined with a foam rubber
padding material to protect the sunglasses from being scratched. A damper spring is snapped onto the pivot shaft of the sunglasses storage bin
door. The damper spring engages two flats on the shaft and is anchored in a slot in the rear flange of the overhead console reading and courtesy
lamp housing to provide a smooth opening action and an open detent position for the storage bin unit.
The sunglasses storage bin and door unit is available for service replacement. The bin and door unit includes the spring-loaded latch mechanism,
the bin liner and the damper spring. If any of these components is damaged or faulty, the sunglasses storage bin and door unit must be replaced.
The sunglasses storage bin is opened by pressing the latch on the rear edge of the door towards the front of the vehicle, then pulling the bin
downward to the open detent position. The spring4oaded latch mechanism on the sunglasses bin door will automatically engage when the bin is
closed. See the owner's manual in the vehicle glove box for more information on the use and operation of the sunglasses storage bin.
Paperclip
A paperclip is standard equipment on the base version of the overhead console. The paperclip provides a convenient place for storage and easy
retrieval of notes, maps, toll tickets or stubs and other paper items that may be required or desired while driving. The paperclip is located near the
front of the overhead console and is secured in the overhead console housing by four screws.
The paperclip is available for service replacement, but it cannot be adjusted or repaired. If the paperclip is damaged or faulty it must be replaced.
COMPASS/MINI-TRIP COMPUTER
The compass mini-trip computer is located in the overhead console on models equipped with this option. The compass mini-trip computer units
include the electronic control module, a Vacuum-Fluorescent Display (VFD), a compass sensor unit and two push button function switches.
The compass mini-trip computer module contains a central processing unit and interfaces with other electronic modules in the vehicle on the
Programmable Communication Interface (J1850) data bus network. The J1850 data bus network allows the sharing of sensor information. This
helps to reduce wire harness complexity, reduce internal controller hardware, and reduce component sensor current loads. At the same time, this
system provides increased reliability, enhanced diagnostics, and allows the addition of many new feature capabilities.
The compass mini-trip computer provides several electronic functions and features. Some of the functions and features that the compass mini-trip
computer module supports and/or controls, include the following display options:
-
Compass and temperature - provides the outside temperature and one of eight compass readings to indicate the direction the vehicle is facing.
-
Trip Odometer (TRIP ODO) - shows the distance travelled since the last trip computer reset.
-
Average fuel economy (AVG ECO) - shows the average fuel economy since the last trip computer reset.
-
Instant fuel economy (ECO) - shows the present fuel economy based upon the current vehicle distance and fuel used information.
-
Distance To Empty (DTE) - shows the estimated distance that can be travelled with the fuel remaining in the fuel tank. This estimated distance
is computed using the average miles-per-gallon from the last 30 gallons of fuel used.
-
Elapsed Time (ET) - shows the accumulated ignition-on time since the last trip computer reset.
-
Blank screen - the compass mini-trip VFD is turned OFF.
The ambient temperature sensor is hard wired to the IWAC control head. Data input for all other compass mini-trip computer functions, including
VFD dimming level, is received through J1850 data bus messages. The compass mini-trip computer uses its internal programming and all of these
inputs to calculate and display the requested data. If the data displayed is incorrect, perform the self-diagnostic tests. If these tests prove
inconclusive, the use of a DRB scan tool and the proper Diagnostic Procedures are recommended for further testing of the compass mini-trip
computer module and the J1850 data bus.
