Durango 2WD V8-4.7L VIN N (2001)
Inboard Brake Shoe
(10) Remove inboard shoe by tilting shoe outward until retainer spring is clear of caliper piston.
(11) Support caliper with wire from suspension component . Do not allow brake hose to support caliper weight.
INSTALLATION - FRONT DISC BRAKE SHOES
(1) Clean the slide surfaces of adapter ledges with a wire brush. Then lubricate surfaces with a thin coat of high temperature grease.
(2) Install the new slide pin bushings if necessary.
(3) Install the inboard shoe. Be sure the retainer spring is firmly seated in the caliper piston.
(4) Insert the outboard brake shoe in the caliper.
