Durango 2WD V8-4.7L VIN N (2001)
stored. Also it is possible a DTC may not be stored if the error has occurred in the ROM which signals the RAM to store the DTC.
The CAB contains a self check program that illuminates the ABS warning light when a system fault is detected. Faults are stored in a diagnostic
program memory and are accessible with the DRB scan tool.
ABS faults remain in memory until cleared, or until after the vehicle is started approximately 50 times. Stored faults are not erased if the battery is
disconnected.
CAB Inputs
The CAB continuously monitors the speed of the differential ring gear by monitoring signals generated by the rear wheel speed sensor. The CAB
determines a wheel locking tendency when it recognizes the ring gear is decelerating too rapidly. The CAB monitors the following inputs to
determine when a wheel locking tendency may exists:
-
Rear Wheel Speed Sensor
-
Brake Lamp Switch
-
Brake Warning Lamp Switch
-
Reset Switch
-
4WD Switch (If equipped)
CAB Outputs
The CAB controls the following outputs for antilock braking and brake warning information:
-
RWAL Valve
-
ABS Warning Lamp
-
Brake Warning Lamp
