Durango 2WD V8-47L (2001) - Brakes & Traction Control - Component Locations
Controller Antilock Brake: Service and Repair
REMOVAL
NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new CAB. For axle type refer to
Differential and Driveline.
Fig. 5 Harness Connector Locks
1. Push the CAB harness connector lock to release the lock and remove the connector from the controller.
Fig. 6 Pump Motor Connector
2. Remove the RWAL valve harness and the pump motor connectors from the controller.