Durango 2WD V8-4.7L VIN N (2001)
Heater Core: Service and Repair
Rear
REMOVAL
1. Remove the rear trim cover.
2. Remove the three blend door actuator screws.
3. Remove the blend door actuator and place aside. Refer to: "Air Door: Air Door Actuator-Motor" See: Heating and Air Conditioning/Air
Door/Air Door Actuator / Motor
4. Remove the two screws from the heater/evaporator tubes plastic retainer.
5. Remove the heater core from the case.
INSTALLATION
1. Install the heater core into the heater-A/C housing.
2. Install the two screws to the heater/evaporator tubes plastic retainer.
3. Install the blend door actuator. Refer to: "Air Door: Air Door Actuator-Motor" See: Heating and Air Conditioning/Air Door/Air Door
Actuator / Motor
4. Install the three blend door actuator screws.
5. Install the rear trim cover.