Durango 2WD V8-4.7L VIN N (2001)
Radiator Cooling Fan Motor: Service and Repair
REMOVAL
If the fan blade is bent, warped, cracked or damaged in any way, it must be replaced only with a replacement fan blade. Do not attempt to repair a
damaged fan blade.
1. Disconnect battery negative cable.
2. Disconnect fan motor wire connector.
3. Remove the two fan shroud mounting clips connecting the upper part of fan shroud to the radiator.
4. Remove fan assembly from radiator.
INSTALLATION
1. Install fan assembly onto the radiator. Tighten bolts 5 Nm (45 inch lbs.).
2. Connect fan motor wire connector to harness connector.
3. Connect battery negative cable.
4. Start engine and check fan operation.
