Durango 2WD V8-4.7L VIN N (2001)
22. Lower the vehicle on the hoist.
23. Refill the cooling system.
24. Connect the battery negative cable to the battery.
INSTALLATION
Complete Heater Line
1. Install the complete heater line assembly to the vehicle.
2. Install all heater line brackets that were not accessible before body lift.
3. Raise the hoist until the frame and body are lined up and the body mounts line up with the frame mounting pieces.
4. Install all remaining underbody heater line assembly brackets.
5. Install all body mount bolts on the passenger side and tighten both the passenger and driver side mount bolts.
6. Raise the lift until the jack stands are free, then remove the jack stands from under the vehicle.
7. Connect the underbody heater lines at the rear heater core.
8. Connect the front underhood heater lines using spring clamp pliers.
9. Install the front and rear inner fenders.
10. Install the passenger side tires.
11. Lower the vehicle on the lift.
12. Install the air box.
13. Refill the cooling system.
