Durango 2WD V8-4.7L VIN N (2001)
Fuel Gauge Sender: Service and Repair
REMOVAL
Fig. 7 Fuel Gauge Sending Unit Location - Typical Module
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module (Fig. 7). The fuel pump module is
located inside of fuel tank.
1. Remove fuel tank.
2. Remove fuel pump module.
3. Unplug 4-way electrical connector (Fig. 7).
4. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.
Fig. 8 Fuel Gauge Sending Unit Lock Tab/Tracks