Durango 2WD V8-4.7L VIN N (2001)
Power Steering Line/Hose: Service and Repair
Hose - Return
REMOVAL - RETURN HOSE
1. Siphon the power steering system.
2. Raise and support the vehicle.
3. Disconnect the return hose at the cooler.
4. Disconnect the return hose at the gear.
5. Remove the return hose from the vehicle.
INSTALLATION - RETURN HOSE
1. Install the return hose to the vehicle.
2. Reconnect the return hose at the cooler. Tighten the hose to 34 Nm (25 ft. lbs.).
3. Reconnect the return hose at the gear. Tighten the hose to 34 Nm (25 ft. lbs.).
4. Remove the support and lower the vehicle.
5. Refill the power steering system.
