dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt and Retractor - Front Seat|Page 6224 > < Seat Belt and Retractor - Front Seat|Page 6222
Page 1
background image

Seat Belt: Service and Repair
Seat Belt and Retractor - Third Row

REMOVAL

WARNING:  DURING AND FOLLOWING ANY SEAT BELT SERVICE, CAREFULLY INSPECT ALL SEAT BELTS, BUCKLES,
MOUNTING HARDWARE, AND RETRACTORS FOR PROPER INSTALLATION, OPERATION, OR DAMAGE. REPLACE ANY
BELT THAT IS CUT, FRAYED, OR TORN. STRAIGHTEN ANY BELT THAT IS TWISTED. TIGHTEN ANY LOOSE FASTENERS.
REPLACE ANY BELT THAT HAS A DAMAGED OR INOPERATIVE BUCKLE OR RETRACTOR. REPLACE ANY BELT THAT HAS
A BENT OR DAMAGED LATCH PLATE OR ANCHOR PLATE. NEVER ATTEMPT TO REPAIR A SEAT BELT COMPONENT.
ALWAYS REPLACE DAMAGED OR FAULTY SEAT BELT COMPONENTS WITH THE CORRECT, NEW AND UNUSED
REPLACEMENT PARTS LISTED IN THE MOPAR PARTS CATALOG.

1. Unsnap and remove the third seat shoulder belt turning loop cover to access the screw that secures the turning loop to the D-pillar.

Fig. 25 Third Seat Shoulder Belt & Retractor

2. Remove the screw that secures the shoulder belt turning loop to the D-pillar.
3. Remove the shoulder belt turning loop from the D-pillar.
4. Remove the nut that secures the third seat lower seat belt anchor plate to the stud on the quarter inner panel.
5. Remove the lower seat belt anchor plate from the stud on the quarter inner panel.
6. Remove the trim from the quarter inner panel.
7. Remove the two screws that secure the seat belt web guide to the D-pillar above the retractor.
8. Remove the screw that secures the retractor to the D-pillar.
9. Remove the third seat shoulder belt and retractor from the D-pillar.

INSTALLATION

WARNING:  DURING AND FOLLOWING ANY SEAT BELT SERVICE, CAREFULLY INSPECT ALL SEAT BELTS, BUCKLES,
MOUNTING HARDWARE, AND RETRACTORS FOR PROPER INSTALLATION, OPERATION, OR DAMAGE. REPLACE ANY
BELT THAT IS CUT, FRAYED, OR TORN. STRAIGHTEN ANY BELT THAT IS TWISTED. TIGHTEN ANY LOOSE FASTENERS.
REPLACE ANY BELT THAT HAS A DAMAGED OR INOPERATIVE BUCKLE OR RETRACTOR. REPLACE ANY BELT THAT HAS
A BENT OR DAMAGED LATCH PLATE OR ANCHOR PLATE. NEVER ATTEMPT TO REPAIR A SEAT BELT COMPONENT.
ALWAYS REPLACE DAMAGED OR FAULTY SEAT BELT COMPONENTS WITH THE CORRECT, NEW AND UNUSED
REPLACEMENT PARTS LISTED IN THE MOPAR PARTS CATALOG.

Seat Belt and Retractor - Front Seat|Page 6224 > < Seat Belt and Retractor - Front Seat|Page 6222