Durango 2WD V8-4.7L VIN N (2001)
Power Steering Fluid Cooler: Service and Repair
FLUID COOLER
REMOVAL
1. Siphon the power steering system.
2. Disconnect the return hose at the pump.
3. Raise and support the vehicle.
4. Disconnect the return hose at the cooler.
5. Remove the cooler mounting nut and bolt.
6. Remove the cooler.
INSTALLATION
1. Install the cooler.
2. Install the cooler mounting nut and bolt.
3. Reconnect the return hose at the cooler.
4. Remove the support and lower the vehicle.
5. Reconnect the return hose at the pump.
6. Refill the power steering system.
