Durango 2WD V8-4.7L VIN N (2001)
Wiper Relay: Service and Repair
Rear Wiper Relay Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig. 15 Power Distribution Center - Typical
2. Remove the cover from the Power Distribution Center (PDC) .
3. See the fuse and relay layout label affixed to the underside of the PDC cover for rear wiper relay identification and location.
4. Remove the rear wiper relay by grasping it firmly and pulling it straight out from the receptacle in the PDC.
Fig. 10 Rear Wiper Blade
INSTALLATION
1. See the fuse and relay layout label affixed to the underside of the PDC cover for the proper rear wiper relay location.
2. Position the rear wiper relay in the proper receptacle in the PDC.