Durango 2WD V8-5.2L VIN Y (1999)
Power Door Lock Relay: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAG AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING
ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO
TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL
INJURY.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the steering column opening cover and knee blocker from the instrument panel. Refer to Steering Column Opening Cover and Knee
Blocker/Service and Repair for the procedures.
Relay And Fuse Block
3. Reach through the outboard side of the steering column opening in the instrument panel to access the relay and fuse block on the back of the
junction block.
4. Unplug the driver unlock relay from the relay and fuse block.
5. Install the driver unlock relay by aligning the relay terminals with the cavities in the relay and fuse block and pushing the relay firmly into place.
6. Connect the battery negative cable.
7. Test the relay operation.
8. Reverse the remaining removal procedures to complete the installation.
