Durango 2WD V8-5.2L VIN Y (1999)
Both the base and the high-line versions of the CTM support the intermittent wipe and wipe-after- wash features, but only the high-line CTM
supports the speed sensitive intermittent wipe. The intermittent wipe relay is one of the outputs that both the base and the high-line versions of the
CTM can control. Each CTM is programmed to energize or de-energize the intermittent wipe relay in response to certain inputs from the
windshield wiper and washer switches and from the windshield wiper motor park switch.
For the speed sensitive intermittent wipe feature, the high-line CTM also uses vehicle speed messages, which are received on the CCD data bus
from the Powertrain Control Module (PCM).
Both versions of the CTM are mounted under the passenger side end of the instrument panel, outboard of the instrument panel glove box opening.
Refer to Central Timer Module/Service and Repair of Instrument Panel Systems for the service procedures.
See Wiper System Testing and Inspection for diagnosis of the base version of the CTM. For diagnosis of the high-line version of the CTM or the
CCD data bus, a DRB scan tool and the proper Diagnostic Procedures are recommended. The CTM cannot be repaired and, if faulty or damaged,
it must be replaced.
