Durango 2WD V8-5.2L VIN Y (1999)
The sensor output signal provides the necessary feedback to the PCM. This feedback is needed to adequately control governor pressure.
GOVERNOR BODY AND TRANSFER PLATE
The transfer plate is designed to supply transmission line pressure to the governor pressure solenoid valve and to return governor pressure.
The governor pressure solenoid valve is mounted in the governor body. The body is bolted to the lower side of the transfer plate. The transfer plate
channels line pressure to the solenoid valve through the governor body. It also channels governor pressure from the solenoid valve to the governor
circuit. It is the solenoid valve that develops the necessary governor pressure.
