Durango 2WD V8-5.2L VIN Y (1999)
Fig. 32
2. Install the pinion rear bearing cup with:
-
Installer C-4308 and Driver Handle C-4171 for the 8 1/4 axle.
-
Installer C-4310 and Driver Handle C-4171 for the 9 1/4 axle.
2. Ensure cup is correctly seated.
3. Apply MOPAR Door Ease, or equivalent, stick lubricant to outside surface of bearing cup.
Fig. 33
4. Install the pinion front bearing cup with:
-
Installer D-130 and Handle C-4171 for the 8 1/4 axle.
-
Installer D-129 and Handle C-4171 for the 9 1/4 axle.
5. Install pinion front bearing, and oil slinger, if equipped.