Durango 2WD V8-5.7L (2008)
Intake Manifold: Specifications
INTAKE MANIFOLD
Install intake manifold retaining bolts, and tighten in sequence from the middle bolts towards the outside in a crisscross pattern. Torque fasteners to 12
Nm (105 in. lbs.).
THROTTLE BODY
CAUTION: The throttle body mounting bolts MUST be torqued to specifications. DO NOT OVER TIGHTEN MOUNTING BOLTS. Over
tightening can cause damage to the throttle body, throttle plate, gaskets, bolts and/or the intake manifold. Proper torque of the mounting bolts
is critical to normal operation.
Throttle Body Bolts ............................................................................................................................................................................. 12 N.m (105 In. Lbs.)
