Durango 2WD V8-5.7L (2008)
Blower Motor Resistor: Service and Repair
Removal - Rear
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the right rear quarter interior trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel
Trim/Quarter Trim Panel - Removal.
3. Disconnect the rear HVAC wire harness connector (1) from the rear blower motor resistor (2).
4. Remove the screw (3) that secures the rear blower motor resistor to the rear HVAC housing (4).
5. Remove the rear blower motor resistor from the rear HVAC housing.