Durango 2WD V8-5.7L (2008)
26. If necessary, remove the mode-air doors from the upper half of the HVAC housing.
27. Carefully lift the A/C evaporator (1) and insulator (3) out of the top of the HVAC housing (2).
NOTE: Front single zone system shown. Front dual zone system similar.
28. Remove the blend-air doors and linkage (1), mode-air door (2), baffle (3) and the duct plate (4) from the lower half of the HVAC housing (6).
29. If necessary, remove the floor distribution duct (5) from the HVAC housing See: Air Duct/Service and Repair/Front Floor Distribution Ducts -
Removal.
Rear HVAC Housing
DISASSEMBLY
NOTE: The rear HVAC housing must be removed from the vehicle and disassembled for service of the A/C evaporator, heater core, mode-air
door, blend-air door and blower motor.