Durango 2WD V8-5.7L (2008)
3. Align the socket plate (2) and bulbs with the openings on the back of the rear lamp unit housing (1).
4. Insert the socket plate and bulbs straight into the housing until the plate is firmly seated.
5. Install and tighten the three screws (3) that secure the socket plate to the housing. Tighten the screws to 1 Nm (12 in. lbs.).
6. Reinstall the rear lamp unit onto the end of the quarter panel. See: Service and Repair/Removal and Replacement/Rear Lamp Unit - Installation.
7. Reconnect the battery negative cable.
