Durango 2WD V8-5.7L (2008)
2. Push the bulb straight into the socket until the base is firmly seated.
3. Align the socket and bulb with the keyed opening on the back of the front lamp unit (1) housing.
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. Reconnect the headlamp and dash wire harness connector to the appropriate park/turn signal or side marker bulb socket.
7. Reinstall the front lamp unit into the front fender. See: Service and Repair/Removal and Replacement/Front Lamp Unit - Installation.
8. Reconnect the battery negative cable.
