Durango 2WD V8-5.7L (2008)
Canister Purge Solenoid: Service and Repair
EVAP Purge Solenoid - Installation
INSTALLATION
The duty cycle EVAP canister purge solenoid (1) is located in the engine compartment. It is attached to a tongue-type bracket near the brake power
booster (3).
1. Connect vapor line quick-connect fitting (5) to solenoid.
2. Connect vapor line quick-connect fitting (4) to solenoid.
3. Connect electrical wiring connector (2) to solenoid.
4. Carefully push the solenoid assembly straight rearward onto the tongue-type bracket without bending the two vapor lines.
