Durango 2WD V8-5.7L (2008)
1. Fold and tumble the right outboard second row seat for easiest access to the center seat back right hinge bracket cover (1).
2. Remove the three screws (3) that secure the cover to the center seat back right hinge bracket (2) and remove the cover.
3. Remove the screw (3) that secures the second row center seat belt buckle anchor (1) to the hinge bracket (2) and remove the buckle.
Second Row - Outboard
SECOND ROW - OUTBOARD
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.
