Durango 2WD V8-5.7L Hybrid (2009)
Rear Vision Camera: Service and Repair
Rear Camera - Installation
INSTALLATION
NOTE: Use of oil is recommended when using self tapping screws to install the new camera assembly.
1. Connect the electrical harness connector.
2. Install the camera to the mounting bracket.
3. Install the camera mounting fasteners.
4. Install the liftgate handle. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Handle/Service and Repair/Exterior
Handle - Installation.
5. Connect the battery negative cable.
