Durango 2WD V8-5.7L Hybrid (2009)
Pedal Positioning Motor: Service and Repair
Installation
INSTALLATION
NOTE: When replacing the components both pedal assemblies must be in the fully down position toward the floor for proper adjustment,
Pedals can be moved manually by rotating the cable on the component not being replaced. New components come in the correct
position until activated.
1. Install the cable by squeezing the tabs together and sliding it over the motor then release.
2. Reconnect the electrical wiring connector to the motor.
3. Install the pin to the pedal bracket.
4. Install the C-clip to the pin.
5. Check for proper operation of the pedal assembly.
