Durango 2WD V8-5.7L Hybrid (2009)
Trailer Connector: Service and Repair
Trailer Tow Connector - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician
trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
2. Reach behind the bracket (1) on the trailer hitch receiver to access and disconnect the connector (3) of the body wire harness from the connector
receptacle on the back of the trailer tow connector housing (2).
3. Reach behind the bracket (2) on the trailer hitch receiver to compress each of the two spring clips (1) on the trailer tow connector housing (3) far
enough to push the housing out through the face of the bracket.
4. Remove the trailer tow connector from the bracket.
