dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Door Hinge > < Front Exterior Handle - Removal|Page 8204
Page 2
background image

5. Position the rear glass run channel back and install the nut and bolt.
6. Tighten the fasteners to 8 Nm (71 in. lbs.).
7. Install the watershield. See: Front Door Panel/Service and Repair/Front Door Water Shield - Installation.
8. Adjust the latch as needed. See: Front Door Latch/Adjustments 

Front Door Hinge > < Front Exterior Handle - Removal|Page 8204