Durango 2WD V8-5.7L Hybrid (2009)
Front Door Latch: Service and Repair
Front Door Latch - Installation
INSTALLATION
1. Install the latch into the door.
2. Connect the electrical connectors (6).
3. Connect the actuator rods (3).
4. Install the screws and tighten to 10 Nm (85 in. lbs.).
5. Adjust the latch as needed. See: Adjustments
6. Position the rear glass run channel back and install the nut and bolt.
7. Tighten the fasteners to 8 Nm (70 in. lbs.).
8. Install the watershield. See: Front Door Panel/Service and Repair/Front Door Water Shield - Installation.
