dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Rear Door Latch > < Rear Door Hinge - Removal|Page 8296
Page 3
background image

3. Install the hinge and nuts to the door washers, if there were removed previously (2). Tighten to 28 Nm (21 ft. lbs.).
4. Adjust the door if needed. See: Adjustments 
5. Install the lower B-pillar trim. See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim Panel-Installation.

Rear Door Latch > < Rear Door Hinge - Removal|Page 8296